ROUND BOOST N/W CHAINRING FOR SRAM

€69.95*

Color
Teeth
Enter your email in the field below and we will notify you when the product is back in stock.
By submitting the form, I accept the general terms and conditions as well as the privacy policy.
Product number: 1002142
Manufacturer: absoluteBLACK
Stock: 0
Product information "ROUND BOOST N/W CHAINRING FOR SRAM"
The Original one and only absoluteBLACK premium Sram compatible Direct mount BOOST148 1X narrow wide chainrings are designed for GXP, DUB and Long BB30 spindle cranks. Chainring is dedicated for Boost148 bikes ONLY. Converts a regular Sram crank into a Boost specific setup. (3mm offset). They are also 100-percent optimized for Eagle.

This chainring with special 3mm offset converts any Sram crank into Boost148 specific setup needed in Boost equipped bikes. Boost and non-Boost Sram cranks are identical. All the offset is achieved by the chainring itself, so you can use any Sram crank for this conversion. Our regular chainrings for Sram cranks have 6mm offset whether this one has 3mm, but both chainrings look very similar.

    Finest design to provide excellent weight to strength ratio
    Unique Patent Pending alternate wide and narrow teeth profiles to keep your chain in place for minimum 12 months!
    Special 3D teeth machining for ultimate mud relief decrease wear and noise dramatically
    They save weight because they don't need the spider and chainring bolts.
    Superb quality and great look.

SPECS
Size & Weight:
28T: 49 g
30T: 50 g
32T: 52 g
34T: 66 g
Compatibility: SRAM AXS, XX1, XX1 Eagle, X01, X01 Eagle, GX Eagle, NX Eagle, SX Eagle, X1, X0, X9, X7, S2210, S1400, Descendant, Stylo, Truvativ AKA and all DUB cranks.Cane Creek eeWings. GXP and Long spindle BB30. BOOST148 bikes ONLY. 9, 10, 11 and 12spd Eagle compatible.
Material: cnc machined 7075 Txxx Aluminum. Long-lasting construction. Mud optimized
Offset: 3mm
Chainline: 52mm (SRAM BOOST148)
Chain: 10 Fach / 11 Fach / 12 Fach
How to mount BOOST N/W CHAINRING FOR SRAM
You need to unscrew these 3 torx t-25 bolts from the crank. Then remove the spider+chainring combo you currently have there. Clean the splines and put some grease on them. Position the chainring in place (note there is only one way to fit this Sram chainring so you don't have to worry how to do it). Close all 3 bolts to about 5-7Nm.