CRASH PLATE™ - ISCG 03

Handle Bar Carbon 35 - Rise: 35

Rise: 35

Our carbon handlebars with a 35mm clamping zone offer the perfect balance of stiffness and flex. The right amount of flex prevents fatigue and results in less arm pump, which gives you more control over the bike, especially on long descents. The aluminum sleeve protects the carbon fibers from constriction and crimping, but also it makes mounting the handlebars with our One Piece Stem a breeze. Due to the perfect placed scale, you can adjust the handlebars precisely and easily towards your needs. Like our stem, the carbon handlebars are tested on DH level. The handlebars come in a width of 800 mm but can be trimmed to 740 mm with a simple metal saw thanks to the integrated scale. You can choose between 20, 27,5 and 35 mm Rise and have all possibilities to adjust your ideal stack height. The handlebars are only approved for use with our one-piece stems because of the taper in the center of the sleeve, anyways they are designed as a unit and perform best as a unit.FEATURES: Aluminum Sleeve to protect the fibers from crimpingPrecise but not harsh Easy to mount with our 1 Piece Stem Takes advantage of 35mm without being over stiff. Hand laid in Kamloops / BC / Canada Weight tolerance: 2% SPECS: Backsweep: 9° Upsweep: 5° Handlebar Clamping: 35 mm Width: 800 mm (can be trimmed down to 740) Rise: 20 mm / 27.5 / 35 mm (Coming Spring 2020) Material: Carbon / Aluminum 6061 Weight: 20 mm = 257,5 gram / 27,5 mm = 259,0 gram / 35 mm = 268,5 gram +/- 2%Color: Matte CarbonFinish:Machining marks from demolding are normal for the handlebar to a certain extent, as the handlebar is neither sanded nor painted. On the one hand, this process is more environmentally friendly and allows us to offer a carbon handlebar at a fair price produced under good working conditions in Canada. Each handlebar goes through careful quality control to be sure that the imperfections are purely aesthetic.Info:By dispensing both the grinding and the painting of the handlebars, we make the production more environmentally friendly compared to other carbon handlebars. However, you have to live with small imperfections in the resin, but these have no negative effect on the durability of the handlebar.Comes incl.: 77designz Sticker Installation Instruction (download only! If you need a printed version, drop us an email) Use only together with our 1 Piece Stem: The handlebar and the 1 Piece Stem have been designed, engineered, and tested as a unit. That is why the handlebar is only allowed to be used together with our unique and super lightweight 1 Piece Stem. You might not see it, but the sleeve is tapered in the center to let it slide into the stem with ease. But exactly that detail does not allow the use with other stems.The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar, which holds the aluminum sleeve in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

€169.95*

Handle Bar Carbon 35 - Rise: 20

Rise: 20

Our carbon handlebars with a 35mm clamping zone offer the perfect balance of stiffness and flex. The right amount of flex prevents fatigue and results in less arm pump, which gives you more control over the bike, especially on long descents. The aluminum sleeve protects the carbon fibers from constriction and crimping, but also it makes mounting the handlebars with our One Piece Stem a breeze. Due to the perfect placed scale, you can adjust the handlebars precisely and easily towards your needs. Like our stem, the carbon handlebars are tested on DH level. The handlebars come in a width of 800 mm but can be trimmed to 740 mm with a simple metal saw thanks to the integrated scale. You can choose between 20, 27,5 and 35 mm Rise and have all possibilities to adjust your ideal stack height. The handlebars are only approved for use with our one-piece stems because of the taper in the center of the sleeve, anyways they are designed as a unit and perform best as a unit.FEATURES: Aluminum Sleeve to protect the fibers from crimpingPrecise but not harsh Easy to mount with our 1 Piece Stem Takes advantage of 35mm without being over stiff. Hand laid in Kamloops / BC / Canada Weight tolerance: 2% SPECS: Backsweep: 9° Upsweep: 5° Handlebar Clamping: 35 mm Width: 800 mm (can be trimmed down to 740) Rise: 20 mm / 27.5 / 35 mm (Coming Spring 2020) Material: Carbon / Aluminum 6061 Weight: 20 mm = 257,5 gram / 27,5 mm = 259,0 gram / 35 mm = 268,5 gram +/- 2%Color: Matte CarbonFinish:Machining marks from demolding are normal for the handlebar to a certain extent, as the handlebar is neither sanded nor painted. On the one hand, this process is more environmentally friendly and allows us to offer a carbon handlebar at a fair price produced under good working conditions in Canada. Each handlebar goes through careful quality control to be sure that the imperfections are purely aesthetic.Info:By dispensing both the grinding and the painting of the handlebars, we make the production more environmentally friendly compared to other carbon handlebars. However, you have to live with small imperfections in the resin, but these have no negative effect on the durability of the handlebar.Comes incl.: 77designz Sticker Installation Instruction (download only! If you need a printed version, drop us an email) Use only together with our 1 Piece Stem: The handlebar and the 1 Piece Stem have been designed, engineered, and tested as a unit. That is why the handlebar is only allowed to be used together with our unique and super lightweight 1 Piece Stem. You might not see it, but the sleeve is tapered in the center to let it slide into the stem with ease. But exactly that detail does not allow the use with other stems.The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar, which holds the aluminum sleeve in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

€169.95*

Handle Bar Carbon 35

Rise: 27,5

Our carbon handlebars with a 35mm clamping zone offer the perfect balance of stiffness and flex. The right amount of flex prevents fatigue and results in less arm pump, which gives you more control over the bike, especially on long descents. The aluminum sleeve protects the carbon fibers from constriction and crimping, but also it makes mounting the handlebars with our One Piece Stem a breeze. Due to the perfect placed scale, you can adjust the handlebars precisely and easily towards your needs. Like our stem, the carbon handlebars are tested on DH level. The handlebars come in a width of 800 mm but can be trimmed to 740 mm with a simple metal saw thanks to the integrated scale. You can choose between 20, 27,5 and 35 mm Rise and have all possibilities to adjust your ideal stack height. The handlebars are only approved for use with our one-piece stems because of the taper in the center of the sleeve, anyways they are designed as a unit and perform best as a unit.FEATURES: Aluminum Sleeve to protect the fibers from crimpingPrecise but not harsh Easy to mount with our 1 Piece Stem Takes advantage of 35mm without being over stiff. Hand laid in Kamloops / BC / Canada Weight tolerance: 2% SPECS: Backsweep: 9° Upsweep: 5° Handlebar Clamping: 35 mm Width: 800 mm (can be trimmed down to 740) Rise: 20 mm / 27.5 / 35 mm (Coming Spring 2020) Material: Carbon / Aluminum 6061 Weight: 20 mm = 257,5 gram / 27,5 mm = 259,0 gram / 35 mm = 268,5 gram +/- 2%Color: Matte CarbonFinish:Machining marks from demolding are normal for the handlebar to a certain extent, as the handlebar is neither sanded nor painted. On the one hand, this process is more environmentally friendly and allows us to offer a carbon handlebar at a fair price produced under good working conditions in Canada. Each handlebar goes through careful quality control to be sure that the imperfections are purely aesthetic.Info:By dispensing both the grinding and the painting of the handlebars, we make the production more environmentally friendly compared to other carbon handlebars. However, you have to live with small imperfections in the resin, but these have no negative effect on the durability of the handlebar.Comes incl.: 77designz Sticker Installation Instruction (download only! If you need a printed version, drop us an email) Use only together with our 1 Piece Stem: The handlebar and the 1 Piece Stem have been designed, engineered, and tested as a unit. That is why the handlebar is only allowed to be used together with our unique and super lightweight 1 Piece Stem. You might not see it, but the sleeve is tapered in the center to let it slide into the stem with ease. But exactly that detail does not allow the use with other stems.The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar, which holds the aluminum sleeve in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

€169.95*

One Piece Stem

Lenght: 35 mm | Color: Black

A super-light Enduro Stem with a 35mm clamp that you can rely on. The smart one-piece construction allows for low weight while being sturdy and stiff. You can choose between 7 different colors and the lengths 35 and 45 mm, so you can customize your bike and adapt it to your personal needs. The assembly with the 77designz carbon handlebars is a piece of cake, but also handlebars from other manufacturers can be mounted with up to 20 mm rise. The 35mm short stem weighs an incredibly light 69 grams, and its 45mm counterpart weighs only 84 grams. Titanium screws are included, and we have passed a DH-level Test at the EFBE test laboratory.FEATURES: Requires only a T25 key EFBE Tri Test MTB Gravity Approved 1 Piece Construction Titanium screws High Stack for best Stiffness to Weight Carbon friendly Clamping SPECS: Headtube: 1.1 / 8 " Handlebar: 35 mm Stack: 40 mm Length: 35 mm / 45 mm Material: AL 7075 TXXXX Bolts: Torx 25 titanium screws Colors: Black / Grey / Natural / Orange / Gold / Red / Blue Weight: 69g (35mm length) 84g (45mm length) Comes incl.: 4x Titanium bolts Black 77designz Sticker Installation Instruction (Download only! If you need a printed version, drop us an email) Information: This stem was developed and tested as a unit with our (Handlebar Carbon 35). Even though the One Piece Stem is fully approved to be used with other handlebars, it is not allowed to spread it, which might make it difficult to use it with other handlebars. The minimum clamping area at the steerer is 39mm. Custom Bolts: For our stems, we use entirely custom made titanium butted screws with a Torx 25. If you want to switch to golden, natural or oil slick bolts, drop us a message before you place your order, and we will set you up. Tested at the highest level: We see no difference between Enduro and Downhill racing; that's why our products get tested on Downhill Level (ASTM F2043-13 / Category 5). The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar which holds the aluminum ring in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America.

€99.95*

FREESOLO™-BB-38

The Freesolo V2 chain guide with its wide range of applications from CC, to Enduro and DH, is a true all-rounder and still the lightest and fully adjustable chain guide on the market. This version can also be mounted on bikes without chain guide mounting options by using the bottom bracket clamp. The CNC milled scale makes it easy to adjust the chainring size, and the adjustment of the chain lines is done with a table and spacers. The "Front Flip Technology" allows you to remove the chain without tools in case of an incident on the trail, or to pull off the crank from the bottom bracket during service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 28-38 teeth.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: BSA BB (Threaded Bottom Bracket)Capacity: 28-38T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 19,7 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set77designz Sticker Information: !!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works also with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

€49.95*

OVAL GUIDE™-S3/ET

The Oval Guide is the lightest fully adjustable chain guide for oval chainrings on the market. This version can also be mounted on bikes without the possibility to mount chain guides by using the bottom bracket clamp. The chain is held securely in any position on the oval chainring. The CNC milled scale facilitates the adjustment to the chainring size and the adjustment of the chain lines becomes child's play by using a chart and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail but also lets you pull the crank out of the bottom bracket during service without having to disassemble the chain guide. FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: S3 / E-Type / E2Capacity: 28-34 Oval or 26-36T Round Kettenlinie: 48-53 mm Kettenlinie BOOST: 51-55 mmCompatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 17 gram (incl. mounting hardware) INCLUDES: ChainguideChainline Spacer Set 2x M5x10 Ti bolts77designz Sticker !!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works only with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

€49.95*

FREESOLO™ V2-S3/ET

The Freesolo V2 chain guide with its wide range of applications from CC, to Enduro and DH is a true all-rounder and still the lightest and fully adjustable chain guide on the market. Like our Crash-Plate, the Chain Guide can be installed without dismounting the crank and you only need a Torx 25 and something to measure. The CNC milled scale makes it easy to adjust to the chainring size and the adjustment of the chain lines is a breeze by means of a table and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail, or pull the crank out of the bottom bracket during service without having to disassemble the chain guide.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Titanium Torx 25 hardware Incredible Light Front Flip Technologie for tool free service Open cage for better mud release SPECS: Mount: SRAM S3 and Shimano E-type and E2 !! The mounting points must be attached to the main frame not to the swing arm!! If its swinging use the oval guide.Capacity: 26-36T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Titanium Screws Color: Black Weight: 16 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set 1x M5x10 Torx 25 Ti Bolt Information: !!! Not compatible with Bionicon and Garbaruk direct mount rings 30T / 28T / 26T due to smaller Chain Line !!! !!! The FREESOLO works only with 1*10 drives if you have an clutch rear derailleur and an narrow / wide chain ring !!!

€49.95*

FREESOLO™-ISCG05-38

The Freesolo V2 chain guide with its wide range of applications from Cross Country to Enduro and DH is a real all-rounder and still the lightest and fully adjustable chain device on the market. As with our Crash-Plate, the chain guide can be installed without dismounting the crank and all you need is a Torx 25 and something to measure. The CNC milled scale makes it easy to adjust the chainring size, and the adjustment of the chain lines is done with a table and spacers. The "Front Flip Technology" allows you to remove the chain without tools in case of an incident on the trail, or to pull off the crank from the bottom bracket during a service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 26-38 teeth.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: ISCG 05 Capacity: 28-38T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 22 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set 2x M6x11 Hollow Bolts 77designz Sticker Installation with Crash Plate:To mount our ISCG 05 models with the Crash Plate you need the Connector. Information:!!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works also with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

€49.95*

OVAL GUIDE™-ISCG05-38

Since oval chainrings are very trendy for many of you, we offer our Oval Guide the lightest fully adjustable chain guide on the market. The assembly is done in no time and without disassembling the crank. The chain is held securely in any position on the oval chainring. The CNC milled scale makes it easy to adjust to the chainring size and the adjustment of the chain lines is a breeze with the help of a table and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail, or pull the crank out of the bottom bracket during service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 26-38 teeth covers.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: ISCG 05Capacity: 28-36 Oval or 26-38T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 23,1 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set 2x M6x11 Hollow Bolts 77designz Sticker Installation with Crash Plate: To mount our ISCG 05 models with the Crash Plate you need the Connector. Information: !!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works also with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

€49.95*

OVAL GUIDE™ - BB-38

The Oval Guide is the lightest fully adjustable chain guide for oval chainrings on the market. This version can also be mounted on bikes without the possibility to mount chain guides by using the bottom bracket clamp. The chain is held securely in any position on the oval chainring. The CNC milled scale facilitates the adjustment to the chainring size and the adjustment of the chain lines becomes child's play by using a chart and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail but also lets you pull the crank out of the bottom bracket during service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 26-38 teeth covers.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: BSA BB (Threaded Bottom Bracket) Capacity: 28-36 Oval or 26-38T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 20,4 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set77designz Sticker Information: !!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works also with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

€49.95*

CRASH PLATE™- ISCG 05 – V2

The V2 of our legendary 77designz CRASH PLATE is milled from extremely tough 7075 T6 aluminum. It protects your chainring (round or oval) from impact damage (For Oval, get 2 Teeth bigger). We offer 4 sizes and seven colors for minimal overlap and max style. Compared to the V1, we have optimized the contact orientation; the new slotted hole means the Taco now also fits Santa Cruz carbon frames. Disassembling the crank is unnecessary to install the Crash Plate, which means assembly is effortless and quick. The minimal overlap of the Taco Bashguard offers the best protection for your chainring while maintaining maximal ground clearance. The Crash Plate can be combined with our ISCG 05 chain guides - all you need is the connector. FEATURES: Super light - Our Crash Plate uses a thin aluminum plate, which is very light but still stronger and more durable than most bulky alternatives. 2 hole mounting - This allows easy installation of the Crash Plate without removing the crank. The Crash Plate now fits all Santa Cruz Carbon frames thanks to a small slotted hole. Hollow screws with T25 - The hollow and stainless screws are lightweight and protect the ISCG mount from overload. Precise fit - we offer our Crash Plate in 4 different sizes. Due to the minimal overlap of the Crash Plate, you can maintain valuable ground clearance. Optimized rotation of the contact area - the alignment of the contact zone on the V2 has been improved to protect expensive chainrings and chains during casual rides and races. Eco-friendly packaging - Our parts are packed in small paper bags without any plastic 5 Year Warranty - We are completely convinced of the quality of our parts, which is why we offer a 5-year warranty on all material and manufacturing defects from the date of purchase Made in Germany - We manufacture our chain guides in Germany, which reduces CO2 emissions from transport and supports our local economy. SPECS: Mount: ISCG 05 (Now fits the Santa Cruz Carbon Frames) Round chainring: 30-36T (Choose the same size or bigger: 32T Round Ring = 32T CRASH PLATE) Oval chainring: 28-34T (Choose +2 teeth or bigger: 32T Oval Ring = 34T CRASH PLATE) Made for: 1x10, 1x11 or 1x12 drivetrain Material: AL 7075 T6 Anodized Hardware: Torx 25 Stainless Steel hollow bolts Colors: BlackSizes: 32T | 34TDiameter: 30T > 133mm | 32T > 141mm | 34T > 149mm | 36T > 157mm Weight: 30T > 25g | 32T > 27g | 34T > 29g | 36T > 31g INFO: Does not fit all Santa Cruz carbon frames because their ISCG 05 has too large tolerances. It is best to measure before ordering, the distance between the lower two ISCG threads center to center should be 55.9 +/- 2 mm.The bash guard is 5 mm thick, and the screws are flush. The screws we use are hollow drilled so that they can shear off in case of an overload. These bolts prevent damage to the frame. Order your spare bolts here: M6x11 SS Hollow BoltsMost of the bike frames nowadays are designed to carry the load introduced by a Taco Bashguard or Crash Plate; regardless, you should still consult your frame manufacturer about whether your frame is approved for our crash plate. INCLUDES: 2x M6x11 SS Hollow Bolts1x 77designz Sticker

€34.95*

CRASH PLATE™ - ISCG 03 – 32 T Black

The 77designz CRASH PLATE is mounted in no time and out of super strong 7075 T6 Aluminium. The minimal overlap of the taco offers best chainring protection without losing ground clearance, so there is no unnecessary rock or log contact like you would have with a big taco bashguard.FEATURES: Install without crank removal Single tool installation Designed for Oval and Round Chain Rings Incredible light and strong Protects your Chainring and Chain Maximum ground clearance SPECS: Mount: ISCG 03 Round chain ring: 26-32TOval chainring: 26-30TPerfect for: 1x10, 1x11 or 1x12 drivetrain Material: AL 7075 T6 Anodized Hardware: Stainless Steel Screws Colors: Black Sizes: 32TWeight: 34 gram INCLUDES: 2x M6x10 SS Srews

€34.95*

BACKPLATE-BB-38

Backplate for FREESOLO™ BB-38 or OVAL GUIDE™ BB-38Capacity: 28-38T Round 26-36 OvalMaterial: 7075 T6 ALUMINIUMColour: BlackComes incl.:1x Backplate

€29.95*

BACKPLATE-ISCG05+BSA

Backplate for FREESOLO™ ISCG 05 + BSA or OVAL GUIDE™ ISCG 05 + BSA Capacity: 26-36T Round 26-34 Oval Material: 7075 T6 ALUMINIUM Colour: Black Comes incl.: 1x Backplate1x M6x11 Torx 25 Ti Bolt

€29.95*

BACKPLATE-ISCG05-38

Backplate for FREESOLO™ ISCG05-38 or OVAL GUIDE™ ISCG05-38Capacity: 28-38T Round 26-36 OvalMaterial: 7075 T6 ALUMINIUMColour: BlackComes incl.:1x Backplate2x Hollow Bolt

€29.95*

BACKPLATE-S3/ET

Backplate for FREESOLO™ S3/E-TYPE or OVAL GUIDE™ S3/E-TYPE Capacity: 26-36T Round 26-34 Oval Material: 7075 T6 ALUMINIUM Colour: Black Comes incl.: 1x Backplate2x M5x11 Torx 25 Ti Bolt

€29.95*

Cap Black Metal

Hide your helmet hair on the podium or wear it at the après race party and show the love for your favorite brand with this quality hat from 77designz. The flexible fit, the sweatband, and a real metal logo are making this hat so unique.FEATURES: Short and Flat Brim Sweatband Flexible Fit Metal Logo 4 Sizes SPECS: Colour: Black Material: 95% Cotton 5% Spandex Material Logo: Metal Sizes: S: 50-52cm / M: 53-55cm / L: 57-59cm / XL: 59-61cm

€29.95*

Seatclamp V2

Extremely lightweight saddle clamp for the diameter 34.9. Available in many Sizes and anodized colors. Standard with a T25 titanium screw. Designed for Roadbikes, Gravel Bikes, and Mountainbikes. No weight limit!V2! Design now adapted to our legendary One Piece Stem. With improved clamping area. This is now tapered, which ensures that the titanium screw does not bend under tension and the surfaces will be parallel. This results in a better clamping performance and increase the fatigue limit.FEATURES: lightweight yet strong Torx 25 Titanium screws No weight limit SPECS: Seat tube diameter: 34.9 mm/ 35 mmMaterial: AL 7075 T6 CNC milled Finish: anodized and laser engraved Screw: T25 Titanium Screw Colors: Black, Red, Gold, Grey, Silver, Blue, Orange Weight: 8 grams

€27.95*

OVAL GUIDE™ - Top Slider Unit

Upper guide part for the OVAL GUIDE™ chain guide. Includes: 4x chain line spacer 1x adjusting nut 1x M4x12 titanium screw 1x Inner Slider 1x Outer Slider

€19.99*

FREESOLO™ V2-Top Slider Unit

Upper guide part for the Freesolo™ V2 chain guide. Includes: 4x chain line spacer 1x adjusting nut 1x M4x12 titanium screw 1x Inner Slider 1x Outer Slider

€19.99*

Air Top Cap - Bottle Crown

Our "Air Top Cap" lets you clip any bottle crown cap on your air suspension fork. Whether it's your favorite beer brand or soft drink, you can show your own taste. A nice little tunning part, about which one comes easily into the conversation, which is super suitable as a small gift among cyclists and after a long tour makes you want to after-brew. It fits on many air suspension forks and thus on almost every mountain bike.SPECS:Mounting: replaces the Air Top Cap. Simply screw onto the air chamber valve.Compatible with: FOX 32 - 40; Rock Shox Lyric, Pike, Reba.Dimension: 29.5 mm outer diameterHeight: 8 mm, with crown cap 9 mmMaterial: Aluminum 7075 T6Color: BlackWeight: 7 g!!!DON'T DRINK AND RIDE!!!It comes without crown cork for the sake of the environment

€16.95*

Grip 135x22 Black

Die leichten 77designz-Griffe bieten durch das Motocross-inspirierte Griffmuster bei jeder Art des Mountainbikens besten Halt und hohen Komfort. Durch die Einzelklemmen auf der Innenseite haben sie eine breitere Grifffläche und schaffen dadurch Platz für verschiedene Griffpositionen. Die geschlossene Außenseite macht die Lenkerdendkappe überflüssig und bietet die gleiche Sicherheit.Eigenschaften: Motocross-inspiriertes Griffmuster für aggressives Fahren Längere Griffflächen ermöglichen unterschiedliche Handablagen Einzelklemmendesign für weniger Gewicht und mehr Komfort An der Außenseite geschlossen macht Lenkerendkappen unnötig Specs: Material: PP / TPRKlemmung: Einzelne Aluminiumklemme Größe: ID 22,2 mm x AD 30 mm x L 135 mm Farbe: Schwarz Gewicht: 104 Gramm

€15.95*

Frame Protection Tape

Length: 50 cm | Width: 3.8 cm

The Frame Protection Tape has two main tasks: firstly, to protect the chainstay from the beating chain and the resulting damage to the paint, and secondly, to minimize the noise level of your bike. Thanks to its self-sealing butyl rubber compound, it sticks to almost all materials and can also be quickly and flexibly applied to uneven and curved areas. You can also use it to avoid chafing from cables on the frame and coarse stone chipping on the down tube. For the chainstay, we recommend the narrower 38mm version and for the down tube the wide 52mm version.FEATURES: Very flexible - Fits all contours and shapes perfectly Self-adhesive UV-resistant Moisture, corrosion and chemical resistant SPECS: Length: 50 cm / 100 cm Width: 38 mm / 52 mm Thickness: 1.65 mm INFO: Bonds on painted, anodised and unfinished surfaces. The surfaces must be degreased before bonding to achieve an optimal result. You can easily cut it with sharp scissors. Avoid tension when applying; otherwise, it will shrink again with time, and you will see glue lines. Shelf Life:Five years from the date of manufacture. Store in a clean, dry place at a temperature of 74°F / 23°C and relative humidity of 50%. Comes Inkl.: 1x roll of tape length and width depending on your choice

€5.95*

OVAL GUIDE SLIDER SET

Spare guide elements for the OVAL GUIDE chain guide Includes: OVAL GUIDE Inner Slider OVAL GUIDE Outer Slider

€9.95*

CRASH PLATE™ - ISCG 03 – 32 T Black

FEATURES:

SPECS:

INCLUDES:

Login