Revolution Wheelset - 2021 Union with I9 Hydra and Sapim CX Ray - Black
Freehub: Shimano Micro Spline | Wheel Size:: 29" / 29"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day. Features:High-end Enduro Carbon wheelsetCarbon Rims Hand-Laid in CanadaIndustry 9 Hubs made in the USAHand Laced in Germany10 Years Rim Warranty (The German equivalent to Life Time)Specifications:Application: EnduroWheel Size: 27,5" / 29"Tires: 2.35" - 2.8"Number of Spokes: 32Brake Type: 6-bolt discFront Hub: Industry 9 Hydra (Boost 110x15)Rear Hub: Industry 9 Hydra (Boost 148x12)Freehub: SRAM XD / Shimano Mirco SplineTubeless System: Tubeless Ready including Tape and ValveFront Wheel Lacing Pattern: 2-crossRear Wheel Lacing Pattern: 2-cross (27.5 - 3-cross)Spoke Type:  CX-RayLeadtime:We carry stock but also build those wheels on demand; non-stock wheels usually ship within 6 weeks.Weights:29 / 27.5" Hydra build with CX-Rays - 1744g29" Hydra build with CX-Rays - 1770gThe Union Carbon Rim:Purpose: Three main points went into the Union. We wanted a rim lighter than The Agent, with a lower radial stiffness than anything we'd made before and dramatic gain in impact resistance. With our new philosophy on layup design and these key points, we could achieve something awe-inspiring. The rims are for Enduro Racing at the highest level and let you ride harder than ever before. If you have ever had doubts about carbon rims, then look no further than the Union.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Industry 9 Hubs:All of our We Are One - Revolution wheelsets are built with Industry 9 hubs and are always default 32 hole hubs.1/1Confident and capable of anything yet budget-friendly, the 1/1 hub stays true to Industry Nine's performance heritage. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4° engagement by way of a six pawl driver and 45 tooth driver, 1/1 takes a no-nonsense approach and welcomes you to Industry Nine.HydraHydra Classic mountain hubs full of features every rider will appreciate, such as revolutionary 0.52° engagement, generously low weights, and an intuitive layout that you can service without any special tools. Our range boasts a universe of standard options in axle fit, spoke hole drillings, disc rotor mounting, freehub bodies, and colors.Sapim Spokes:All of our We Are One - Revolution wheelsets are laced with 32 Sapim Spokes.RaceThe Sapim Race is a very popular double butted spoke. Build up tension is easy—less torsion and not as elastic as the Laser spokes are the key points. The Race provides a better shock absorption thanks to a thinner middle section than non-butted spokes. Dealers say about this traditional spoke: "Never change a winning team"CX-RayIf you like to save some weight, the CX-Ray is for you. It still receives one of the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. Special alloy treatment and sophisticated production make this all possible. The CX-Ray fits in all standard hub holes.

€1,895.00*
We Are One - The Union
Felge: The Union | Wheel Size:: 29"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day.Features:Carbon Rims Hand-Laid in Canada10 Years Rim Warranty (The German equivalent to Life Time)32 hole Specifications:Strife: 580g for the 27.5 and 605g for the 29erUnion: 485g for the 27.5 and 495g for the 29erConvert: 495g for the 27.5 and 515g for the 29erFaction: 425g,  29er onlyRevive: 345g , 29er onlyCoup:  425g , 26" onlyLeadtime:We carry  rims in stock and non-stock rims usually ship within 6 weeks.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Some key tips:Spoke TensionWe always require that you build with a high-end tension gauge. Make sure that the tension meter is calibrated and reading correctly.Our high tension target is 115kg/f or 1130 N/m.  Do your best to keep all tension within 2% from one spoke to the next on each side of the hub. If you can achieve better, the better the wheel will be, and the longer it will go without needing maintenance.DO NOT build our wheels without a tension meter. It will lead to premature failure and undue stress on the rim.Spoke NipplesAll of our rims must be assembled with Sapim spokes and Sapim Polyax nipples. Sapim makes by far the best nipple in the industry, and we do not rely on anyone else in-house. The shape of the Polyax nipple is ideal for building without washers and provides the best possible nipple to spoke articulation to date.Tools and Truing StandUsing high-quality tools always gives the best outcome. If you have taken on the job of building up your wheel, please ensure you have the required tools to do so.A professional Parktool truing stand, lateral dishing tool, and high quality 4 sided spoke keys are an excellent place to start. Take your time and enjoy the process. Building wheels can be very rewarding and the outcome, if done right, can last a lifetime. You got this!

€495.00*
Revolution Wheelset - 2021 Union with I9 1/1 and Sapim Race - Black
Freehub: SRAM XD | Wheel Size:: 29" / 27,5"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day. Features:High-end Enduro Carbon wheelsetCarbon Rims Hand-Laid in CanadaIndustry 9 Hubs made in the USAHand Laced in Germany10 Years Rim Warranty (The German equivalent to Life Time)Specifications:Application: EnduroWheel Size: 27,5" / 29"Tires: 2.35" - 2.8"Number of Spokes: 32Brake Type: 6-bolt discFront Hub: Industry 9 101 (Boost 110x15)Rear Hub: Industry 9 101 (Boost 148x12)Freehub: SRAM XD / Shimano Mirco SplineTubeless System: Tubeless Ready including Tape and ValveFront Wheel Lacing Pattern: 2-crossRear Wheel Lacing Pattern: 2-cross (27.5 - 3-cross)Spoke Type: Sapim RaceLeadtime:We carry stock but also build those wheels on demand; non-stock wheels usually ship within 6 weeks.Weights:29 / 27.5" 1/1 build with Race spokes - 1854g29" 1/1 build with Race spokes - 1880gThe Union Carbon Rim:Purpose: Three main points went into the Union. We wanted a rim lighter than The Agent, with a lower radial stiffness than anything we'd made before and dramatic gain in impact resistance. With our new philosophy on layup design and these key points, we could achieve something awe-inspiring. The rims are for Enduro Racing at the highest level and let you ride harder than ever before. If you have ever had doubts about carbon rims, then look no further than the Union.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Industry 9 Hubs:All of our We Are One - Revolution wheelsets are built with Industry 9 hubs and are always default 32 hole hubs.1/1Confident and capable of anything yet budget-friendly, the 1/1 hub stays true to Industry Nine's performance heritage. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4° engagement by way of a six pawl driver and 45 tooth driver, 1/1 takes a no-nonsense approach and welcomes you to Industry Nine.HydraHydra Classic mountain hubs full of features every rider will appreciate, such as revolutionary 0.52° engagement, generously low weights, and an intuitive layout that you can service without any special tools. Our range boasts a universe of standard options in axle fit, spoke hole drillings, disc rotor mounting, freehub bodies, and colors.Sapim Spokes:All of our We Are One - Revolution wheelsets are laced with 32 Sapim Spokes.RaceThe Sapim Race is a very popular double butted spoke. Build up tension is easy—less torsion and not as elastic as the Laser spokes are the key points. The Race provides a better shock absorption thanks to a thinner middle section than non-butted spokes. Dealers say about this traditional spoke: "Never change a winning team"CX-RayIf you like to save some weight, the CX-Ray is for you. It still receives one of the best results in fatigue testing of any spoke. Its unique strength and flexibility make the CX-Ray suitable for most bicycle disciplines. Special alloy treatment and sophisticated production make this all possible. The CX-Ray fits in all standard hub holes.

€1,495.00*
We Are One - The Strife
Felge: The Strife | Wheel Size:: 29"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day.Features:Carbon Rims Hand-Laid in Canada10 Years Rim Warranty (The German equivalent to Life Time)32 hole Specifications:Strife: 580g for the 27.5 and 605g for the 29erUnion: 485g for the 27.5 and 495g for the 29erConvert: 495g for the 27.5 and 515g for the 29erFaction: 425g,  29er onlyRevive: 345g , 29er onlyCoup:  425g , 26" onlyLeadtime:We carry  rims in stock and non-stock rims usually ship within 6 weeks.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Some key tips:Spoke TensionWe always require that you build with a high-end tension gauge. Make sure that the tension meter is calibrated and reading correctly.Our high tension target is 115kg/f or 1130 N/m.  Do your best to keep all tension within 2% from one spoke to the next on each side of the hub. If you can achieve better, the better the wheel will be, and the longer it will go without needing maintenance.DO NOT build our wheels without a tension meter. It will lead to premature failure and undue stress on the rim.Spoke NipplesAll of our rims must be assembled with Sapim spokes and Sapim Polyax nipples. Sapim makes by far the best nipple in the industry, and we do not rely on anyone else in-house. The shape of the Polyax nipple is ideal for building without washers and provides the best possible nipple to spoke articulation to date.Tools and Truing StandUsing high-quality tools always gives the best outcome. If you have taken on the job of building up your wheel, please ensure you have the required tools to do so.A professional Parktool truing stand, lateral dishing tool, and high quality 4 sided spoke keys are an excellent place to start. Take your time and enjoy the process. Building wheels can be very rewarding and the outcome, if done right, can last a lifetime. You got this!

€495.00*
We Are One - The Revive
Felge: The Revive | Wheel Size:: 29"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day.Features:Carbon Rims Hand-Laid in Canada10 Years Rim Warranty (The German equivalent to Life Time)32 hole Specifications:Strife: 580g for the 27.5 and 605g for the 29erUnion: 485g for the 27.5 and 495g for the 29erConvert: 495g for the 27.5 and 515g for the 29erFaction: 425g,  29er onlyRevive: 345g , 29er onlyCoup:  425g , 26" onlyLeadtime:We carry  rims in stock and non-stock rims usually ship within 6 weeks.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Some key tips:Spoke TensionWe always require that you build with a high-end tension gauge. Make sure that the tension meter is calibrated and reading correctly.Our high tension target is 115kg/f or 1130 N/m.  Do your best to keep all tension within 2% from one spoke to the next on each side of the hub. If you can achieve better, the better the wheel will be, and the longer it will go without needing maintenance.DO NOT build our wheels without a tension meter. It will lead to premature failure and undue stress on the rim.Spoke NipplesAll of our rims must be assembled with Sapim spokes and Sapim Polyax nipples. Sapim makes by far the best nipple in the industry, and we do not rely on anyone else in-house. The shape of the Polyax nipple is ideal for building without washers and provides the best possible nipple to spoke articulation to date.Tools and Truing StandUsing high-quality tools always gives the best outcome. If you have taken on the job of building up your wheel, please ensure you have the required tools to do so.A professional Parktool truing stand, lateral dishing tool, and high quality 4 sided spoke keys are an excellent place to start. Take your time and enjoy the process. Building wheels can be very rewarding and the outcome, if done right, can last a lifetime. You got this!

€495.00*
We Are One - The Faction
Felge: The Faction | Wheel Size:: 29"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day.Features:Carbon Rims Hand-Laid in Canada10 Years Rim Warranty (The German equivalent to Life Time)32 hole Specifications:Strife: 580g for the 27.5 and 605g for the 29erUnion: 485g for the 27.5 and 495g for the 29erConvert: 495g for the 27.5 and 515g for the 29erFaction: 425g,  29er onlyRevive: 345g , 29er onlyCoup:  425g , 26" onlyLeadtime:We carry  rims in stock and non-stock rims usually ship within 6 weeks.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Some key tips:Spoke TensionWe always require that you build with a high-end tension gauge. Make sure that the tension meter is calibrated and reading correctly.Our high tension target is 115kg/f or 1130 N/m.  Do your best to keep all tension within 2% from one spoke to the next on each side of the hub. If you can achieve better, the better the wheel will be, and the longer it will go without needing maintenance.DO NOT build our wheels without a tension meter. It will lead to premature failure and undue stress on the rim.Spoke NipplesAll of our rims must be assembled with Sapim spokes and Sapim Polyax nipples. Sapim makes by far the best nipple in the industry, and we do not rely on anyone else in-house. The shape of the Polyax nipple is ideal for building without washers and provides the best possible nipple to spoke articulation to date.Tools and Truing StandUsing high-quality tools always gives the best outcome. If you have taken on the job of building up your wheel, please ensure you have the required tools to do so.A professional Parktool truing stand, lateral dishing tool, and high quality 4 sided spoke keys are an excellent place to start. Take your time and enjoy the process. Building wheels can be very rewarding and the outcome, if done right, can last a lifetime. You got this!

€495.00*
We Are One - The Convert
Felge: The Convert | Wheel Size:: 29"
We Are One offers High-End Carbon Rims, hand-laid in Kamloops, designed by people who know how to shred. Build to take on any challenge you throw at them, and they also have a nice build in radial forgiveness to filter harsh impacts and offer you a genuine ride feel. We tested them over two years and did not touch a spoke; they are true and straight as on their first day.Features:Carbon Rims Hand-Laid in Canada10 Years Rim Warranty (The German equivalent to Life Time)32 hole Specifications:Strife: 580g for the 27.5 and 605g for the 29erUnion: 485g for the 27.5 and 495g for the 29erConvert: 495g for the 27.5 and 515g for the 29erFaction: 425g,  29er onlyRevive: 345g , 29er onlyCoup:  425g , 26" onlyLeadtime:We carry  rims in stock and non-stock rims usually ship within 6 weeks.10 Year Warranty:If you break a rim while riding, you'll get a new one. Period. It is that simple.NO rim replacement cost (We charge only for shipping)NO hidden fine-print10 Years Support (The German equivalent to Life Time)Ride the industry's best carbon rims and worry no more.In case you destroyed your rims in a nonriding scenario, we will offer you a crash replacement? Go to your specialist dealer or get in touch with us, and we will create an offer that will get you back on the bike quickly at a minimal cost.Some key tips:Spoke TensionWe always require that you build with a high-end tension gauge. Make sure that the tension meter is calibrated and reading correctly.Our high tension target is 115kg/f or 1130 N/m.  Do your best to keep all tension within 2% from one spoke to the next on each side of the hub. If you can achieve better, the better the wheel will be, and the longer it will go without needing maintenance.DO NOT build our wheels without a tension meter. It will lead to premature failure and undue stress on the rim.Spoke NipplesAll of our rims must be assembled with Sapim spokes and Sapim Polyax nipples. Sapim makes by far the best nipple in the industry, and we do not rely on anyone else in-house. The shape of the Polyax nipple is ideal for building without washers and provides the best possible nipple to spoke articulation to date.Tools and Truing StandUsing high-quality tools always gives the best outcome. If you have taken on the job of building up your wheel, please ensure you have the required tools to do so.A professional Parktool truing stand, lateral dishing tool, and high quality 4 sided spoke keys are an excellent place to start. Take your time and enjoy the process. Building wheels can be very rewarding and the outcome, if done right, can last a lifetime. You got this!

€495.00*