This headset cap lets you place your favorite beverage cap on top of your headset. This small part motivates you to keep going until the end of the day as you always have your favorite treat in mind. It also makes a perfect gift for any ridding buddy and is a great conversation opener as almost everybody likes to talk about his favorite beer brand. It fits on every Ahead headset and therefore on almost every mountain bike, trekking bike, and road bike.SPECS: Mount: 1.1/8" and Tapered Steerertubes  Material: Alumium 7075T6 Color: Black Weight: 5 g !!!DONT DRINK AND RIDE!!! No shipping to USA Comes without bottle crown, star nut and screw in order to reduce waste. Just use your original mounting hardware.

Pan-Ty® locking tie, standard cross-section, 7.4" (188mm) length, military spec weather-resistant nylon 6.6, black to mount 77designz FAT Fender or PLUS Fender.INCLUDES: 4x Pan-Ty® locking tie 

The V2 of our legendary 77designz CRASH PLATE is milled from extremely tough 7075 T6 aluminum. It protects your chainring (round or oval) from impact damage (For Oval, get 2 Teeth bigger). We offer 4 sizes and seven colors for minimal overlap and max style. Compared to the V1, we have optimized the contact orientation; the new slotted hole means the Taco now also fits Santa Cruz carbon frames. Disassembling the crank is unnecessary to install the Crash Plate, which means assembly is effortless and quick. The minimal overlap of the Taco Bashguard offers the best protection for your chainring while maintaining maximal ground clearance. The Crash Plate can be combined with our ISCG 05 chain guides - all you need is the connector.  FEATURES: Super light - Our Crash Plate uses a thin aluminum plate, which is very light but still stronger and more durable than most bulky alternatives. 2 hole mounting - This allows easy installation of the Crash Plate without removing the crank. The Crash Plate now fits all Santa Cruz Carbon frames thanks to a small slotted hole. Hollow screws with T25 - The hollow and stainless screws are lightweight and protect the ISCG mount from overload. Precise fit - we offer our Crash Plate in 4 different sizes. Due to the minimal overlap of the Crash Plate, you can maintain valuable ground clearance. Optimized rotation of the contact area - the alignment of the contact zone on the V2 has been improved to protect expensive chainrings and chains during casual rides and races. Eco-friendly packaging - Our parts are packed in small paper bags without any plastic 5 Year Warranty - We are completely convinced of the quality of our parts, which is why we offer a 5-year warranty on all material and manufacturing defects from the date of purchase Made in Germany - We manufacture our chain guides in Germany, which reduces CO2 emissions from transport and supports our local economy. SPECS: Mount: ISCG 05 (Now fits the Santa Cruz Carbon Frames) Round chainring: 30-36T (Choose the same size or bigger: 32T Round Ring = 32T CRASH PLATE) Oval chainring: 28-34T (Choose +2 teeth or bigger: 32T Oval Ring = 34T CRASH PLATE) Made for: 1x10, 1x11 or 1x12 drivetrain Material: AL 7075 T6 Anodized Hardware: Torx 25 Stainless Steel hollow bolts Colors: BlackSizes: 32T | 34TDiameter: 30T > 133mm | 32T > 141mm | 34T > 149mm | 36T > 157mm Weight: 30T > 25g | 32T > 27g | 34T > 29g | 36T > 31g INFO: The Crash Plate does not fit all Santa Cruz Carbon Frames as their ISCG 05 has too large tolerances. It is best to measure before ordering; the center to center distance should be 55.9 +/- 2 mm.The bash guard is 5 mm thick, and the screws are flush. The screws we use are hollow drilled so that they can shear off in case of an overload. These bolts prevent damage to the frame. Order your spare bolts here: M6x11 SS Hollow BoltsMost of the bike frames nowadays are designed to carry the load introduced by a Taco Bashguard or Crash Plate; regardless, you should still consult your frame manufacturer about whether your frame is approved for our crash plate. INCLUDES: 2x M6x11 SS Hollow Bolts1x 77designz Sticker

The silicone foam hose has the main task to prevent the rattling of internally routed brake or shifting cables. It is big enough to fit thick steel flex hoses fit without problems. The hose is very tough and can neither be decomposed by brake fluid nor store water and therefore gain weight. In addition, it can be used as a cable guide under the chainstay which is taped off with our Frame Protection Tape. Features:Helps against noise and clattering of internally routed cablesFits even for thick steel flex brakes hoseLocal production: Made in GermanyVery tough, can be used several timesDoes not react with brake fluidsHighly foamed and therefore very lightClosed cells, cannot store waterSpecs:Mounting: Frame with internally routed cablesLength: 100 cmInner Diameter: 6mmOuter Diameter: 11mmMaterial: Silicone FoamColour: OrangeWeight: 30 grams/ meterIncludes:100 cm silicone foam hose

The Frame Protection Tape has two main tasks: firstly, to protect the chainstay from the beating chain and the resulting damage to the paint, and secondly, to minimize the noise level of your bike. Thanks to its self-sealing butyl rubber compound, it sticks to almost all materials and can also be quickly and flexibly applied to uneven and curved areas. You can also use it to avoid chafing from cables on the frame and coarse stone chipping on the down tube. For the chainstay, we recommend the narrower 38mm version and for the down tube the wide 52mm version.FEATURES: Very flexible - Fits all contours and shapes perfectly Self-adhesive UV-resistant Moisture, corrosion and chemical resistant SPECS: Length: 50 cm / 100 cm Width: 38 mm / 52 mm Thickness: 1.65 mm INFO: Bonds on painted, anodised and unfinished surfaces. The surfaces must be degreased before bonding to achieve an optimal result. You can easily cut it with sharp scissors. Avoid tension when applying; otherwise, it will shrink again with time, and you will see glue lines. Shelf Life:Five years from the date of manufacture. Store in a clean, dry place at a temperature of 74°F / 23°C and relative humidity of 50%. Comes Inkl.: 1x roll of tape length and width depending on your choice

Connects the 77designz CRASH PLATE - ISCG 05 with:FREESOLO™ ISCG 05 - 38OVAL GUIDE™ ISCG 05 - 38And their respective predecessorsINCLUDES: 1x 2,5 mm Red Washer 2x M6x16 SS Bolt .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Our particularly light carbon stem spacers with an outer diameter of 34 mm fit perfectly with our one-piece stem and form a flowing unit. The spacer is available in the heights 5, 10, 15, and 20 mm. The UD matt coated carbon finish with the black 77designz logo is a discreet understatement and fits every style.FEATURES:Small outer diameter - looks lovely with our One Piece Stem.Extremely light - Carbon and a unique inner profile with four reinforcement ribs.SPECS:Stem: 1.1 / 8 "Heights: 5, 10, 15, 20mmMaterial: CarbonOutside diameter: 34mmWeight: 5 = 1.4 grams, 10 = 2.8 grams, 15 = 4.1 grams, 20mm = 5.5 gramsColors: Carbon UD with black 77designz logo

A super-light Enduro Stem with a 35mm clamp that you can rely on. The smart one-piece construction allows for low weight while being sturdy and stiff. You can choose between 7 different colors and the lengths 35 and 45 mm, so you can customize your bike and adapt it to your personal needs. The assembly with the 77designz carbon handlebars is a piece of cake, but also handlebars from other manufacturers can be mounted with up to 20 mm rise. The 35mm short stem weighs an incredibly light 69 grams, and its 45mm counterpart weighs only 84 grams. Titanium screws are included, and we have passed a DH-level Test at the EFBE test laboratory.FEATURES: Requires only a T25 key EFBE Tri Test MTB Gravity Approved 1 Piece Construction Titanium screws High Stack for best Stiffness to Weight Carbon friendly Clamping SPECS: Headtube: 1.1 / 8 " Handlebar: 35 mm Stack: 40 mm Length: 35 mm / 45 mm Material: AL 7075 TXXXX Bolts: Torx 25 titanium screws Colors: Black / Grey / Natural / Orange / Gold / Red / Blue Weight: 69g (35mm length) 84g (45mm length) Comes incl.: 4x Titanium bolts Black 77designz Sticker Installation Instruction (Download only! If you need a printed version, drop us an email) Information: This stem was developed and tested as a unit with our (Handlebar Carbon 35). Even though the One Piece Stem is fully approved to be used with other handlebars, it is not allowed to spread it, which might make it difficult to use it with other handlebars. The minimum clamping area at the steerer is 39mm. Custom Bolts: For our stems, we use entirely custom made titanium butted screws with a Torx 25. If you want to switch to golden, natural or oil slick bolts, drop us a message before you place your order, and we will set you up. Tested at the highest level: We see no difference between Enduro and Downhill racing; that's why our products get tested on Downhill Level (ASTM F2043-13 / Category 5). The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar which holds the aluminum ring in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America.

The 77designz PLUS Fender offers best mud protection for 2.3 to 3" tires and the sizes 26", 650B or 29 ". Made of super lightweight but very sturdy plastic and finished with screen printed logo and our slogan "PLAY DIRTY " it motivates you in to ride in the bad conditions. Another cool thing is that a friend of us produces them here in Münster on an old Heidelberg printing machine FEATURES: Stops mud and gravel getting into your face. Can be used on all wheel sizes. Protects your fork stanchions. Made in Münster (Germany) SPECS: Fits to: 90% of the forks and a lot of rear trianglesPerfect for: SR Suntour, Rock Shox, FOX and MarzocchiTires: 26" x 2,3-3,0" / 27,5" x 2,3-3" / 29" x 2,2-3,0"Weight: 20g (without cable ties) Get high quality cable ties >>HERE<< What the media says: MTB VCO | FAT BIKE INSTALLATION INSTRUCTION: 77designz mud fender installation from 77designz on Vimeo.

Die leichten 77designz-Griffe bieten durch das Motocross-inspirierte Griffmuster bei jeder Art des Mountainbikens besten Halt und hohen Komfort. Durch die Einzelklemmen auf der Innenseite haben sie eine breitere Grifffläche und schaffen dadurch Platz für verschiedene Griffpositionen. Die geschlossene Außenseite macht die Lenkerdendkappe überflüssig und bietet die gleiche Sicherheit.Eigenschaften: Motocross-inspiriertes Griffmuster für aggressives Fahren Längere Griffflächen ermöglichen unterschiedliche Handablagen Einzelklemmendesign für weniger Gewicht und mehr Komfort An der Außenseite geschlossen macht Lenkerendkappen unnötig Specs: Material: PP / TPRKlemmung: Einzelne Aluminiumklemme Größe: ID 22,2 mm x AD 30 mm x L 135 mm Farbe: Schwarz Gewicht: 104 Gramm

Since oval chainrings are very trendy for many of you, we offer our Oval Guide the lightest fully adjustable chain guide on the market. The assembly is done in no time and without disassembling the crank. The chain is held securely in any position on the oval chainring. The CNC milled scale makes it easy to adjust to the chainring size and the adjustment of the chain lines is a breeze with the help of a table and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail, or pull the crank out of the bottom bracket during service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 26-38 teeth covers.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: ISCG 05Capacity: 28-36 Oval or 26-38T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 23,1 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set 2x M6x11 Hollow Bolts 77designz Sticker Installation with Crash Plate: To mount our ISCG 05 models with the Crash Plate you need the Connector.  Information: !!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works only with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

The Freesolo V2 chain guide with its wide range of applications from Cross Country to Enduro and DH is a real all-rounder and still the lightest and fully adjustable chain device on the market. As with our Crash-Plate, the chain guide can be installed without dismounting the crank and all you need is a Torx 25 and something to measure. The CNC milled scale makes it easy to adjust the chainring size, and the adjustment of the chain lines is done with a table and spacers. The "Front Flip Technology" allows you to remove the chain without tools in case of an incident on the trail, or to pull off the crank from the bottom bracket during a service without having to disassemble the chain guide. The versions marked with the 38 have a chainring adjustment range of 26-38 teeth.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: ISCG 05 Capacity: 28-38T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 22 gram (incl. mounting hardware) INCLUDES: Chainline Spacer Set 2x M6x11 Hollow Bolts 77designz Sticker Installation  with Crash Plate:To mount our ISCG 05 models with the Crash Plate you need the Connector. Information:!!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works only with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!

All 77designz titanium screws are also available here individually for endless possibilities of customizing.SPECS: Colors: Natural, Black, Gold, Oilslick Material: Grade 5 Titanium Which bolts for for what? Seatclamp 34.9 = 1x M5x10 Crash Plate ISCG 05 = 2x M6x11  Chainguides (Oval Guide or Freesole V2); ISCG 05 = 2x M6x11, ISCG 05+BSA, HDM = 1x M6x11, S3/ET = 2x M5x10 1 Piece Stem = 2x M6x15 + 2x M5x14 Discbrake Disc Bolts = 12x M5x10

Tubeless Valves that do what they are supposed to do! The “Flat Base” means a firm airtight fit is easily achieved without cranking on the locking nut with a pair of pliers. The seal is not fixed to the valve, making valve removal a doddle if you need to fit an emergency tube.Features: Pair of Flat Base Valves with soft rubber internal seal 2 Colours: Hot Red or Stealth Black Anodised aluminium Large locking nut with rubber O-ring Aluminium valve cap 40mm long Pro Cap - Valve core removal tool and valve protection It’s all about the Flat Base… Whilst testing our Tyre Yogurt sealant we experienced issues with many tubeless valves. The external locking nuts, O rings & the internal seals often failed or leaked sealant. So, we went searching for what we thought was the perfect MTB tubeless valve… The “Flat Base” means a firm airtight fit is easily achieved without cranking on the locking nut with a pair of pliers. The internal seal is made of soft malleable rubber & is multi-shaped to fit most MTB rims. The seal is not fixed to the valve, making valve removal a doddle if you need to fit an emergency tube. Large locking nut with oversized rubber O-ring secures the valve without damaging the rim. 40mm long, anodised aluminium in Hot Red or Stealth Black. Aluminium valve cap, valve core tool included.

Works only with real Tubeless Tires!Tyre Yoghurt seals punctures & prevents flats in tubeless MTB tyres. Tyre Yogurt MTB Sealant will not separate, clump or dry out. It contains no latex, or ammonia, is water washable, non toxic & the “Flat Free & Full of Fibre” tech seals up to 6mm cuts in MTB tubeless tyres.Features: Seals 6mm punctures No latex No ammonia Will not dry out Will not separate Non-corrosive Non-toxic Water washable How does it work? When a puncture occurs, the air in the tyre forces the millions of fibers and fillers in Tyre Yogurt into the hole. This forms a flexible plug that prevents further air loss. As the liquid is not part of the sealing process, we do not have to use latex. We use a liquid that will not dry out, separate or clump together so it will never block your valves. How to use it: Use Tubeless Ready Tyres & Rims Remove cap & trim nozzle Add a blob of Tyre Yogurt around valve seal Dry seat tyre without sealant Deflate tyre, pop the bead & pour 120-150ml of Tyre Yogurt into the tyre or directly through the valve Re-seat tyre & inflate with a track pump or compressor Spin & bounce wheel a few times You are now... “Flat Free & Full of Fibre” FAQ: Is Tyre Yogurt a sealant milk? Tyre yogurt, is not sealant milk, as it just does not dry out; it will always bleed slightly it is a puncture protection. Can I also use Tire Yogurt for CX or Road? No, Tire Yogurt is developed for mountain bikes only, a version for higher air pressures is in the development.

Our carbon handlebars with a 35mm clamping zone offer the perfect balance of stiffness and flex. The right amount of flex prevents fatigue and results in less arm pump, which gives you more control over the bike, especially on long descents. The aluminum sleeve protects the carbon fibers from constriction and crimping, but also it makes mounting the handlebars with our One Piece Stem a breeze. Due to the perfect placed scale, you can adjust the handlebars precisely and easily towards your needs. Like our stem, the carbon handlebars are tested on DH level. The handlebars come in a width of 800 mm but can be trimmed to 740 mm with a simple metal saw thanks to the integrated scale. You can choose between 20, 27,5 and 35 mm Rise and have all possibilities to adjust your ideal stack height. The handlebars are only approved for use with our one-piece stems because of the taper in the center of the sleeve, anyways they are designed as a unit and perform best as a unit.FEATURES: Aluminum Sleeve to protect the fibers from crimpingPrecise but not harsh Easy to mount with our 1 Piece Stem Takes advantage of 35mm without being over stiff. Hand laid in Kamloops / BC / Canada Weight tolerance: 2% SPECS: Backsweep: 9° Upsweep: 5° Handlebar Clamping: 35 mm Width: 800 mm (can be trimmed down to 740) Rise: 20 mm / 27.5 / 35 mm (Coming Spring 2020) Material: Carbon / Aluminum 6061 Weight: 20 mm = 257,5 gram / 27,5 mm = 259,0 gram / 35 mm = 268,5 gram +/- 2%Color: Matte CarbonComes incl.: 77designz Sticker Installation Instruction (download only! If you need a printed version, drop us an email) Use only together with our 1 Piece Stem: The handlebar and the 1 Piece Stem have been designed, engineered, and tested as a unit. That is why the handlebar is only allowed to be used together with our unique and super lightweight 1 Piece Stem. You might not see it, but the sleeve is tapered in the center to let it slide into the stem with ease. But exactly that detail does not allow the use with other stems.The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar, which holds the aluminum sleeve in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

The Freesolo V2 chain guide with its wide range of applications from CC, to Enduro and DH is a true all-rounder and still the lightest and fully adjustable chain guide on the market. Like our Crash-Plate, the Chain Guide can be installed without dismounting the crank and you only need a Torx 25 and something to measure. The CNC milled scale makes it easy to adjust to the chainring size and the adjustment of the chain lines is a breeze by means of a table and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail, or pull the crank out of the bottom bracket during service without having to disassemble the chain guide.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Titanium Torx 25 hardware Incredible Light Front Flip Technologie for tool free service Open cage for better mud release SPECS:    Mount: ISCG 05+BSA (44-44.6 mm diameter / SRAM DUB BSA / Hollowtech II)Not compatible with e13 or Race Face Cinch BSA30 Bottom Brackets (Diameter is too big). But you can trim the support legs with the file, of course without loss of guarantee.Capacity: 26-36T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 SS Hollow BoltsColor: Black Weight: 16 gram (incl. mounting hardware) INCLUDES: ChainguideChainline Spacer Set 1x Torx 25 SS Hollow BoltsInformation: !!! Not compatible with Bionicon and Garbaruk direct mount oval rings 30T / 28T / 26T due to smaller Chain Line !!! !!! The FREESOLO works only with 1*10 drives if you have an clutch rear derailleur and an narrow / wide chain ring !!! What means +BSA? +BSA means that the backplate of the Chainguide spots it self on the BSA BB shell.

Our new hollow bolts for the crash plate are created to protect your ISCG tabs from massive overloads. They are strong enough to hold most load cases but weak enough to shear of under extreme loads.FEATURES: Hollow design to protect your ISCG tabs Torx 25 just like all of our small bolts SPECS: Mount: ISCG 05 Material: Stainless Steel Color: Natural Sizes: M6x11 Torx25 Weight: 6 gram (2 bolts) INFO: Most of the frames nowadays are designed to take the loads introduced into the frame by a Tacco Bashguard, nevertheless, you should consider with your frame manufacturer whether your frame is approved for our Crashplate or not. INCLUDES: 2x M6x11 SS Hollow Bolts

Backplate for FREESOLO™ BB-38 or OVAL GUIDE™ BB-38Capacity: 28-38T Round 26-36 OvalMaterial: 7075 T6 ALUMINIUMColour: BlackComes incl.:1x Backplate

Upper guide part for the Freesolo™ V2 chain guide. Includes: 4x chain line spacer 1x adjusting nut 1x M4x12 titanium screw 1x Inner Slider 1x Outer Slider

Our carbon handlebars with a 35mm clamping zone offer the perfect balance of stiffness and flex. The right amount of flex prevents fatigue and results in less arm pump, which gives you more control over the bike, especially on long descents. The aluminum sleeve protects the carbon fibers from constriction and crimping, but also it makes mounting the handlebars with our One Piece Stem a breeze. Due to the perfect placed scale, you can adjust the handlebars precisely and easily towards your needs. Like our stem, the carbon handlebars are tested on DH level. The handlebars come in a width of 800 mm but can be trimmed to 740 mm with a simple metal saw thanks to the integrated scale. You can choose between 20, 27,5 and 35 mm Rise and have all possibilities to adjust your ideal stack height. The handlebars are only approved for use with our one-piece stems because of the taper in the center of the sleeve, anyways they are designed as a unit and perform best as a unit.FEATURES: Aluminum Sleeve to protect the fibers from crimpingPrecise but not harsh Easy to mount with our 1 Piece Stem Takes advantage of 35mm without being over stiff. Hand laid in Kamloops / BC / Canada Weight tolerance: 2% SPECS: Backsweep: 9° Upsweep: 5° Handlebar Clamping: 35 mm Width: 800 mm (can be trimmed down to 740) Rise: 20 mm / 27.5 / 35 mm (Coming Spring 2020) Material: Carbon / Aluminum 6061 Weight: 20 mm = 257,5 gram / 27,5 mm = 259,0 gram / 35 mm = 268,5 gram +/- 2%Color: Matte CarbonComes incl.: 77designz Sticker Installation Instruction (download only! If you need a printed version, drop us an email) Use only together with our 1 Piece Stem: The handlebar and the 1 Piece Stem have been designed, engineered, and tested as a unit. That is why the handlebar is only allowed to be used together with our unique and super lightweight 1 Piece Stem. You might not see it, but the sleeve is tapered in the center to let it slide into the stem with ease. But exactly that detail does not allow the use with other stems.The Collaboration with We Are One! The concept idea for the cockpit comes from us, but for the implementation, we needed a reliable partner who is well versed in carbon fabrication, we found this partner with We Are One Composites. We Are One has enriched the handlebar with the small retention nipple on the handlebar, which holds the aluminum sleeve in position. We Are One filed a patent for this idea. We are One Composites from Kamloops / BC in Canada is the manufacturer of our handlebars and distributes a conceptually identical cockpit in North America. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Works only with real Tubeless Tires!Tyre Yoghurt seals punctures & prevents flats in tubeless MTB tyres. Tyre Yogurt MTB Sealant will not separate, clump or dry out. It contains no latex, or ammonia, is water washable, non toxic & the “Flat Free & Full of Fibre” tech seals up to 6mm cuts in MTB tubeless tyres.Features: Seals 6mm punctures No latex No ammonia Will not dry out Will not separate Non-corrosive Non-toxic Water washable How does it work? When a puncture occurs, the air in the tyre forces the millions of fibers and fillers in Tyre Yogurt into the hole. This forms a flexible plug that prevents further air loss. As the liquid is not part of the sealing process, we do not have to use latex. We use a liquid that will not dry out, separate or clump together so it will never block your valves. How to use it: Use Tubeless Ready Tyres & Rims Remove cap & trim nozzle Add a blob of Tyre Yogurt around valve seal Dry seat tyre without sealant Deflate tyre, pop the bead & pour 120-150ml of Tyre Yogurt into the tyre or directly through the valve Re-seat tyre & inflate with a track pump or compressor Spin & bounce wheel a few times You are now... “Flat Free & Full of Fibre” FAQ: Is Tyre Yogurt a sealant milk? Tyre yogurt, is not sealant milk, as it just does not dry out; it will always bleed slightly it is a puncture protection. Can I also use Tire Yogurt for CX or Road? No, Tire Yogurt is developed for mountain bikes only, a version for higher air pressures is in the development.

Tubeless Valves that do what they are supposed to do! The “Flat Base” means a firm airtight fit is easily achieved without cranking on the locking nut with a pair of pliers. The seal is not fixed to the valve, making valve removal a doddle if you need to fit an emergency tube.Features: Pair of Flat Base Valves with soft rubber internal seal 2 Colours: Hot Red or Stealth Black Anodised aluminium Large locking nut with rubber O-ring Aluminium valve cap 40mm long Pro Cap - Valve core removal tool and valve protection It’s all about the Flat Base… Whilst testing our Tyre Yogurt sealant we experienced issues with many tubeless valves. The external locking nuts, O rings & the internal seals often failed or leaked sealant. So, we went searching for what we thought was the perfect MTB tubeless valve… The “Flat Base” means a firm airtight fit is easily achieved without cranking on the locking nut with a pair of pliers. The internal seal is made of soft malleable rubber & is multi-shaped to fit most MTB rims. The seal is not fixed to the valve, making valve removal a doddle if you need to fit an emergency tube. Large locking nut with oversized rubber O-ring secures the valve without damaging the rim. 40mm long, anodised aluminium in Hot Red or Stealth Black. Aluminium valve cap, valve core tool included.

The Oval Guide is the lightest fully adjustable chain guide for oval chainrings on the market. This version can be mounted on bikes with ISCG 05 tabs and a threaded BSA Bottom Bracket. The chain is held securely in any position on the oval chainring. The CNC milled scale facilitates the adjustment to the chainring size and the adjustment of the chain lines becomes child's play by using a chart and spacers. The front flip technology allows you to remove the chain without tools in case of a breakdown on the trail but also lets you pull the crank out of the bottom bracket during service without having to disassemble the chain guide.FEATURES: Install without crank removal Torx 25 only single tool installation Boost compatible Incredible Light Front Flip Technologie for tool free service Open cage for better mud release Made in Germany SPECS: Mount: ISCG 05+BSA (44-44.6 mm diameter / SRAM DUB BSA / Hollowtech II). Not compatible with e13 or Race Face Cinch BSA30 Bottom Brackets (Diameter is too big), you can shorten the supports with the file, of course without guarantee loss.Capacity: 28-34 Oval or 26-36T Round Chainline: 48-53 mm (Boost Ready) Compatibility: 1x10, 1x11 or 1x12 drivetrain Backplate: AL 7075 T6 Black Anodized Slider: PA66 GF 10 (Front Flip Technology) Hardware: Torx 25 Hollow Bolts Weight: 17 gram (incl. mounting hardware) INCLUDES: ChainguideChainline Spacer Set 1x Torx 25 SS Hollow Bolts77designz Sticker !!! Not compatible with Bionicon and Garbaruk non boost chain rings (30T / 28T / 26T) due to smaller Chain Line !!! !!! The FREESOLO works only with 1*10 drives if you have a clutch rear derailleur and an narrow / wide chain ring !!!